Programmet varierer mellem danske og engelske konferenceoplæg, hvorfor du vil opleve at sproget på denne side varierer. Programmet bliver løbende opdateret.
// The programme includes both Danish and English speaks. Therefore, you will find both Danish and English text on this site. The programme will be updated continuously.
Se programmet for // See the programme for:
| WIND ENERGY DENMARK | Data Centers Denmark |
| Eksportkonference - Rundt om Tyskland | Maskinsikkerhed |
| 3D Tech | The Smart Company |
WIND ENERGY DENMARK
Nedenfor kan du se programmet for WIND ENERGY DENMARK tirsdag på hi-messen.
//Below you can see the programme for WIND ENERGY DENMARK tuesday at the hi expo.
High level opening session: Global green transition – can the wind industry turn ambitions into reality? 
tuesDAy 5 OcT.| 09:30 - 10:15 AM | HALl F, main stage
The opening session revolves around overall theme for WIND ENERGY DENMARK this year: How the global green transition and how the high expectations for wind development can be seen as both a blessing and a curse for the Danish part of the wind value chain. On one hand, it opens unimaginably large business opportunities and on the other hand, it creates an immense pressure on both the value chain and technology. In short, the key questions for the event is: 'Global green transition - can the wind industry turn ambitions into reality'? We will use the opening session to take a deep dive into the challenges and opportunitites the wind industry is facing in the years to come. Do we forsee a perfect storm forming for the Danish wind industry? - but being the wind industry that is a godd thing, right?
Speakers:
Giles Dickson, CEO, WindEurope,
Jan Kjærsgaard, CEO Offshore, GE Renewable Energy
Martin Neubert, Chief Commercial Officer & Deputy Group CEO, Ørsted
Wind turbine technology – are we designing our own death?
tuesDAy 5 OcT.| 10:15 - 11:15 AM | HALl F, main stage
The Paris Agreement aims to limit global warming by reducing CO2 emissions. Renewable energy technologies are the key to reducing emissions in the electricity sector, which is today the single largest source of CO2 emissions. IEA's pathway to net zero, almost 90% of global electricity generation in 2050 comes from reneable sources with solar PV and wind together acoounting for nearly 70%. Said in another way: In 2030 the offshore wind industry needs to have increased its speed of installed capacity 16 times compared to 2020. Hence, going from 5 GW installed capacity in 2020 to 80 GW in 2030. Is this speedy acceleration even possible? In order to deliver on the 'moon landing' ambition, what should receive more focus - building bigger WTG's or industrialize the sector?
Speakers:
Henrik Stiesdal, CEO, Stiesdal
Morten Pilgaard Rasmussen, Global Head of Technology, Siemens Gamesa
Martin Neubert, Deputy Group CEO and Cheif Commercial Officer, Ørsted
Anders Nielsen, CTO and EVP, Vestas Wind Systems
How others work with sustainability – Learnings from Klimaklar SMV
tuesDAy 5 OcT.| 10:15 - 11:15 AM | HALl F, workshop 1
Becoming more sustainable is a challenge that most companies are facing and are at various stages of adressing. In the project 'Klimaklar SMV', 50 SMEs have received consultancy assistence in: calculating their CO2 emissions, planning a strategy with recommendations to reduce these, and a plan on how to communicate outcomes to customers. This session will focus on cases and general learnings from the project and include a workshop process with a short group discussion.
Speaker:
Bjarne Bach, Senior projektleder, Viegand Maagøe
Moderator:
Anja Pedersen, Senior Advisor, Wind Denmark
Energy Islands – powering the future Europe. How can it be done?
tuesDAy 5 OcT.| 10:15 - 11:15 AM | HALl F, workshop 2
Denmark has embarked on a challenging mission to design, plan, construct and operate two energy islands in the North Sea respectively the Baltic Sea next to Bornholm. It represents an immensely ambition plan, with many challenges along the way. Representatives from DTU, AAU and Ørsted will discuss how the energy islands will transform the power system and which solutions are needed to accommodate this transformation.
Speakers:
Nicolaos A. Cutululis, Professor, DTU Wind Energy
Filipe Miguel Faria da Silva, Assoc. Prof. AAU
Wind resource estimation: the latest news I
tuesDAy 5 OcT.| 10:15 - 11:15 AM | HALl F, workshop 3
In this session participants will hear the latest news within wind resource estimation. We will cover a wide range of topics, including advanced modelling, remote-sensing measurements, machine learning, wakes, and validation.
Speakers:
Mark Zagar, Senior Specialist - Energy Meteorology Vestas Wind Systems
Ebba Dellwik, Senior Scientist, DTU Wind Energy
Anders Sommer, Senior R&D Engineer Wind Power, Vattenfall
Per Nielsen, Manager EMD
BiCA – Bird Collision Avoidance by Advanced Siting
tuesDAy 5 OcT.| 10:15 - 11:15 AM | innovation zone, HALl F
The BiCA project has developed a tool which aids in siting wind farms. This is done by automated counting of birds using radar and AI. When combined with existing data in an easy-to-use user interface it provides a strong and objective support for traditional bird monitoring methods in the siting process.
Speakers:
Eldina Salkanović, PhD Fellow, Innovation & Concepts, Sustainability, Vestas Wind Systems and Aarhus University
Niels Einar Jensen, Manager, Furuno Environmental Technology Center at Furuno Danmark
Moderator:
Christian Munk Jensen, Project Manager, Energy Cluster Denmark,
A rapidly developing supply chain – what are the key to global Danish success?
tuesDAy 5 OcT.| 12:00 - 13:00 PM | HALl F, main stage
The foreseen global growth rates for wind energy represents not only a huge potential for Danish companies but also huge pressure, if they want to maintain a position as global market leaders. So how does the global supply chain setup need to look like to fulfill the global green ambitions in the years to come and are the Danish part of the industry still a substantial player?
Speaker:
Steen Broust Nielsen, Vice President, Head of Global Sales, Wood Mackenzie sets the scene and identifies the 5 biggest challenges for the industry in the next decade, which will then be the starting point for the following panel debate.
Panel:
Richard Flansmose, Senior Vice President, Global Manufacturing, Vestas Wind Systems
Henrik Bonnerup, Partner, Polaris
Modular & advanced manufacturing in the wind industry
tuesDAy 5 OcT.| 12:00 - 13:00 PM | HALl F, workshop 1
Digitaisation, modularised manufacturing and innovations in the supply chain will drive competitiveness across the value chain from initial design to decommissioning. Modularised manufacturing and assembly can aleviate barriers to turbine upscaling, reducing the need for ever increasing logistical equipment. Combined with standardized procedures and components, the next phase of industrialisation will allow the industry to both scale and reduce the cost of wind power.
Speaker:
Per Hessellund Lauritsen, Offshore Research Manager, Siemens Gamesa Renewable Energy
Hans Christian Thisen, Inventor, Maxars
Kristian Lehmann Madsen, Principal Engineer & Project manager MadesBlades, LM Wind
PtX – let’s get this party started
tuesDAy 5 OcT.| 12:00 - 13:00 PM | HALl F, workshop 2
PtX is gaining increased attention as one of the key solutions to decarbonize the sectores that are hard to electrify. In their Paris Agreement-compatible net zero in 2050-scenario, IEA predicts an electrolyzer capacity of 850 GW in 2030. To reach such an ambitious target, a rapid acceleration of the PtX-industry, sufficient renewable electricity and the associated infrastructure is needed. Stakeholders from the PtX value chain will shortly present their view on the main barriers and opportunities for the PtX-industry. The presentations will be followed by a panel discussion about how to adress the barriers and accelerate the PtX-industry.
Speakers:
Finn Daugaard Madsen, Head of Hydbrid, Storage & Conversion, Siemens Gamesa Renewable Energy
Troels Krag Boysen, Head of Commercial Analytics, Green Hydrogen Systems and a representative from Energinet
Moderator:
Michael Madsen, Senior Advisor, Wind Denmark
Wind resource estimation: the latest news II
tuesDAy 5 OcT.| 12:00 - 13:00 PM | HALl F, workshop 3
In this session participants will hear the latest news within wind resource estimation. We will cover a wide range of topics, including advanced modelling, remote-sensing measurements, machine learning, wakes, and validation.
Speakers:
Nicolai Gayle Nygaard, Senior Lead Wind Energy Analyst, Ørsted
Mark Kelly, Associate Professor, DTU Wind Energy
Peter Enevoldsen, Director of Centre for Energy Technologies, Aarhus university
Lars Landberg, Director, Group Leader - Renewables, DNV GL
DecomBlades - The Circular Economy Value Chains for Decommissioned Wind Turbine Blades
tuesDAy 5 OcT.| 12:00 - 13:00 PM | innovation zone, HALl F
DecomBlades focus on three promising recycling technologies: cement kiln, pyrolysis and mechanical shredding. DecomBlades takes a crucial next step to mature these processes and to establish each of the necessary steps in the value chain, such as product disposal specifications, logistics, process mapping and optimization, demonstration, life cycle analysis and more.
Speakers:
Christian Munk Jensen, Project Manager, Energy Cluster Denmark
Tobias Ruby, Senior Manager R&D, Ørsted
Sophus Borch, Product Manager - Non-Ferrous materials, H.J.Hansen Genvindingsindustri
Offshore – the battle ground of the majors
tuesDAy 5 OcT.| 14:00 - 15:00 PM | HALl F, main stage
Not since the battle of Jutland in 1916 have we seen such a battle ground in the North Sea. But fortunately, this time it is not countries and warships but energy majors and installation ships there is doing the 'fighting' and this time it is not to destroy but to deploy - creating the new energy future of Europe with a massive build out of offshore wind. But what does the entrance of ambitious oil and energy majors mean for the offshore wind sector, what are their intentions and what will it do for e.g. market mechanism, technology development, supply chain, workforce etc.
Speakers:
Betina Jørgensen, Coutry & Offtake Manager Offshore Wind, TotalEnergies
Panel debate: Value chain reflections
Carsten Nielsen, Senior Vice President, Semco Maritime,
Jan Villum Kristiansen, Executive Head of Offshore Product Lifecycle Management, Siemens Gamesa Renewable Energy
Manfred Volanthen, CEO, Swire Energy Services
Moderator:
Søren Lassen, Head of Global Offshore Wind Research, WoodMackenzie
Digital twins
tuesDAy 5 OcT.| 14:00 - 15:00 PM | HALl F, workshop 1
The purpose of the session is to show what some key partners in the ReliaBlade project works with around digitalization and to inspire what digital twin technology may mean for the wind energy industry and what it gives of opportunities for the future.
Speakers:
Kim Branner, Senior Researcher, DTU Wind Energy
Kasper Reck-Nielsen, CEO, CEKO Sensors
Bart Peeters, Product Line Manager Structures and Environmental Testing, Siemens Digital Industries Software
Trygve Skjøtskift, Associate Partner - Energy, Environment & Utilities, IBM Denmark
Megavind Annual Agenda
tuesDAy 5 OcT.| 14:00 - 15:00 PM | HALl F, workshop 2
Establish in 2006, the role of Megavind is to formulate strategic recommendations within research, development, test and demonstration of wind energy and adjacent technologies. Megavind represents stakeholders from the whole wind sector's value chain and work to increas the value of wind by consolidating next priorities of technological development. In this session, we will go thorugh Megavind as the platform where research, development, test and demonstration recommendations are consolidated. Herafter, we dive into some og Megavind's latest work going through Megavind's Annual Research and Innovation Agenda 2021, Megavind's latest progress on its work with partnerships in the wind energy supply chain and test, verification and validation recomendations.
Speakers:
Per Hessellund Lauritsen, Offshore Research Manager, Siemens Gamesa Renewable Energy
Mattias Andersson, Senior Consultant, DTU Wind Energy
Claus Vilhelmsen, Managing Director, Øglænd System
Peter Hjuler, Deputy Institure Director, DTU Wind Energy
Aerodynamics & blade technology
tuesDAy 5 OcT.| 14:00 - 15:00 PM | HALl F, workshop 3
The blade length, slenderness and flexibility has increased dramatically during recent years. Combined with new opportunities from focus on manufacturing and modularization, this raises the complexity in the technology development. The development is on one hand conditioned on demanding requirements to the technology, the underlying design tools and the validation of the operational blade characteristics and performance. On the other hand this opens up for further mind-blowing achievements in blade technology.
Speakers:
Flemming Rasmussen, Head of Section, DTU Wind Energy
Alejandro Gomez Gonzalez, Chief Engineer, Siemens Gamesa Renewable Energy
Frederik Zahle, Senior Researcher, DTU Wind Energy
Moderator:
Kenneth Thomsen, Head of Division - Wind Turbine Design, DTU Wind Energy
Flemming Rasmusen, Head of Section, DTU Wind Energy
Dragons den: Show me your gamechanger
tuesDAy 5 OcT.| 14:00 - 15:00 PM | innovation zone, HALl F
ideas and their potential, challenges, applications, and technology readiness.
Ideas, projects, or products are evaluated and selected for “elevator pitch”. An elevator pitch is a short, pre-prepared speech that explains what the new innovative solution does clearly and succinctly. After each pitch, the audience and the experts will ask questions, and the experts from the wind industry will evaluate the idea. At the end of the session, the experts will reflect on all of the presented solutions.
Speakers:
Anders Rebsdorf, Chief Sales Officer, Liftra
Ignacio Marti Perez, Head of Division Wind Energy Materials and Components, DTU Wind Energy
Bo Svoldgaard, Senior Vice President, Vestas Wind Systems
LCOE vs. sustainability – contradictory or complementary?
tuesDAy 5 OcT.| 15:45 - 16:45 PM | HALl F, main stage
Panel debate:
Dorte Kamper, Vice President, Sales & Marketing, LM Wind Power
Mads Kirkegaard, CEO, Polytech
Filip Engel, Vice President, Ørsted
Moderator:
Jan Hylleberg, CEO, Wind Denmark
Next generation technology meets pub quiz!
tuesDAy 5 OcT.| 15:45 - 16:45 PM | HALl F, workshop 1
This session rounds up a day of many inputs and it is time to free our minds and imagination and embark on journey into the future of wind energy technology or at least how we could imagine the future of wind energy technology. What directions do we see, what game changers will emerge on the way? How is the market developing? Will we see PtX plants at all offshore wind power plants in the near future. In an alternative session format where pub quiz meets brainstorm we will work together, inspire each other in trying to predict the future. And when the session ends, we will have created a unique time capsule that we can revisit at future Wind Energy Denmark events to determine who were the greatest fortune tellers of the wind industry in the year 2021.
Speaker:
Christina Aabo, Head of R&D, Ørsted – Quiz master
Robots to scale manufacturing and increase productivity
tuesDAy 5 OcT.| 15:45 - 16:45 PM | HALl F, workshop 2
Collaborative robots can work next to operator, making it possible to produce more with the same amount of staff. Data collection during production enables consistent quality with full documentation og materiales and process, which in turn makes future service operations easier to forecast, plan, and execute.
This workshop aims to identify how manufacturing and productivity can be scales using the latest technology. The workshop starts with a presentation on robot and technology trends, from collaborative robots to artificialt intelligence. Next, the group breaks up in small sessions to discuss and brainstorm areas where industry-wide solutions are needed. Finally, recommendations are gathered in plenum for next steps.
Speakers:
Søren-Peter Johansen, Technology Manager, Danish Technological Institute
Rune Hahn Kristensen, Senior Consultant, Danish Technological Institute
Aerodynamics & blade technology II
tuesDAy 5 OcT.| 15:45 - 16:45 PM | HALl F, workshop 3
The session will address challenges, limitations, and new findings concerning aerolastic modeling of large flexible tubines: curved blades, standstill situations and floating turbines with large movements.
Speakers:
Georg Pirrung, Senior Researcher, DTU Wind Energy
Sergio Gonzáles Horcas, Senior Researcher, DTU Wind Energy
Néstor Ramos Garcia, Senior Researcher, DTU Wind Energy
Moderator:
Kenneth Thomsen, Head of Division - Wind Turbine Design, DTU Wind Energy
Flemming Rasmussen, Head of Section, DTU Wind Energy
Quali-Drone. Intelligent, autonomous, drone inspection of large structures within the energy industry
tuesDAy 5 OcT.| 15:45 - 16:45 PM | innovation zone, HALl F
Quali Drone is an innovation project aiming to develop and demonstrate fully automatic intelligent drone inspections to recognize errors on surfaces and measure large structures. This will be done by using artificial intelligence (AI), machine learning and digital twin technology for documentation purposes to comply with applicable industry standards. Inspection of offshore wind turbine foundations from Bladt Industries is the use-case in this project. However, drone inspection is not limited to offshore wind, but can be applicated to other industries e.g., inspection of photovoltaics parks, construction sites, buildings and infrastructure, bridges, roads, highways and railways.
Speakers:
Jesper Smit, CEO & Founder, Quali Drone
Jeppe Hebsgaard Laursen, Director, Zebicon
Moderator:
Christian Boysen, Project Director, Energy Cluster Denmark,
DATA CENTERS DENMARK
Nedenfor kan du se programmet for Data Centers Denmark tirsdag på hi-messen.
//Below you can see the programme for Data Centers Denmark tuesday at the hi expo.
Panel: 5 years with hyperscale data centers in Denmark - impact and industry developments
tuesDAy 5 OcT.| 10:00 - 10:45 AM | Hal M
Speakers:
Henrik Hansen, Business Viborg
Karsten Rieder, Business Esbjerg
Jakob Dybdal Christensen, COWI
Jesper Koch, Dansk Fjervarme
John Jørgensen, Novenco
Fireside keynotes
tuesDAy 5 OcT.| 12:00 - 12:45 PM| HAL M
Fireside keynotes:
12.00-12.20: Fireside keynote: Sustainable solutions for the data center industry
Per Henriksen, Penta Infra
12.25-12.45: Fireside keynote: Leveraging sustainability in data centers through digitalization
Jørgen Bjerg, ABB
EKSPORTKONFERENCE: RUNDT OM TYSKLAND
Nedenfor kan du se programmet for Eksportkonferencen tirsdag på hi-messen.
//Below you can see the programme for The Export Conference tuesday at the hi expo.
Velkomst 
tuesDAy 5 OcT.| 13:00 PM | AUDITORIET PÅ 1. SAL VED INDGANG VEST
Ved Chef for Fremstillingsindustrien Jacob Kjeldsen, DI
Rundt om Tyskland
tuesDAy 5 OcT.| 13:05 PM | AUDITORIET PÅ 1. SAL VED INDGANG VEST
Lykke Friis sætter fokus på det netop afholdte Forbundsdagsvalg – hvordan ser hun udviklingen i Tyskland i et dansk og et europæisk perspektiv – hvilke muligheder ligger der for danske virksomheder i en eksportkontekst, herunder en perspektivering på den grønne omstilling og bæredygtighed
Speaker:
Lykke Friis, Direktør, Tænketanken Europa
Forstå og udvis interkulturel forståelse
tuesDAy 5 OcT.| 13:25 PM | Auditoriet på 1. sal ved indgang vest
Hør om markedet, aktuelle konjunkturtal, kulturen og om Tyskland som partner. Ved at forstå og udvise interkulturel forståelse kan man som virksomhed opnå store point på sympatikontoen.
Speaker:
Reiner Perau, Direktør , Dansk-Tysk Handelskammer
Tyskland er stort - hvilken geografisk placering skal du vælge?
tuesDAy 5 OcT.| 13:45 PM | Auditoriet på 1. sal ved indgang vest
Med 16 delstater skal man gøre sig store overvejelser omkring sin geografiske placering, når man vil etablere sig i eller eksportere til Tyskland. Markedsresearch og kendskab til kundepotentialet, og deres geografiske placering i Tyskland, er altafgørende.
Speaker:
Robert Perz, Direktør , DI Tyskland
En dansker i en tysk virksomhed og en tysk virksomhed på det danske marked
tuesDAy 5 OcT.| 14:05 PM | Auditoriet på 1. sal ved indgang vest
Hvorfor er vi så forskellige, når vi er så tætte naboer? Hvilke kulturelle opdagelser og faldgruber har vi oplevet på vores rejse med en tysk virksomhed i en dansk kontekst og hvordan skaber man det perfekte samarbejde på tværs af forretningskulturer.
Speaker:
Michael Nielsen, Administrerende direktør, Beckhoff Automation ApS, Denmark
Rejsen til Tyskland starter i Danmark
tuesDAy 5 OcT.| 14:25 PM | Auditoriet på 1. sal ved indgang vest
Hør om overvejelserne og strategien bag beslutningen om at etablere sig i Tyskland. Hvilke erfaringer har de høstet igennem beslutningsprocessen, setuppet og valget af München? og om hvordan de navigerer i en hel ny sammenhæng på tværs af landegrænserne ?
Speaker:
Søren Hovmand, Administrerende direktør, Hovmand A/S og (Gmbh)
Paneldebat, spørgsmål og afrunding
tuesDAy 5 OcT.| 14:40 PM | Auditoriet på 1. sal ved indgang vest
Speakers:
Lykke Friis, Direktør, Tænketanken Europa
Reiner Perau, Direktør , Dansk-Tysk Handelskammer
Robert Perz, Direktør, DI Tyskland
Michael Nielsen, Administrerende direktør, Beckhoff Automation ApS, Denmark
Søren Hovmand, Administrerende direktør, Hovmand A/S og (Gmbh)
Jacob Kjeldsen, Chef for Fremstillingsindustrien DI
MASKINSIKKERHED
Nedenfor kan du se programmet for Maskinsikkerhed tirsdag på hi-messen.
//Below you can see the programme for Maskinsikkerhed tuesday at the hi expo.
Nyt om CE-mærkning af maskiner
tuesDAy 5 OcT. | 09:00 - 09:45 | meeting room - M23 at entrance south
Maskinsikkerhed ApS orienterer om Den kommende maskinforordning i hovedtræk, nye danske regler kan give mærkbare bøder og evt fængsel, nyt syn på ansvar kan medføre at forsikringsselskaber nægter erstatning og at direktør/medarbejdere kan bortvises ved alvorlige overtrædelser. Desuden oplyses om nye standarder og standarder på vej.
Speaker:
Hans Morten Henriksen, Direktør
Risikovurdering i praksis, incl myndigheders krav
tuesDAy 5 OcT. | 10:00 - 10:45 | MEETING ROOM - M23 AT ENTRANCE SOUTH
Både Sikkerhedsstyrelsen og Arbejdstilsynet har strammet op omkring risikovurderingen af maskiner, herunder ombygning/ændring. Maskinsikkerhed ApS orienterer om hvad der er nyt, og hvordan man kan løse opgaven så målet nås, uden at tidsforbruget løber løbsk.
Speaker:
Laura Kjeldsen, Afdelingsleder
ATEX i virkelighedens verden
tuesDAy 5 OcT. | 11:00 - 11:45 | MEETING ROOM - M23 AT ENTRANCE SOUTH
ATEX og eksplosionssikring kan være kompliceret, men langt de fleste opgaver er enkle at løse. Vi giver en kort introduktion til begrebet og viser veje til, hvordan man selv kan få et overblik over opgaver og vælge produktionsvenlige løsninger.
Speaker:
Hans Morten Henriksen, Direktør
Indkøb af maskiner og anlæg: Hold styr på ansvar og opgaver
tuesDAy 5 OcT. | 12:00 - 12:45 | MEETING ROOM - M23 AT ENTRANCE SOUTH
Både private og offentlige virksomheder har brug for at kunne styre ansvaret ved indkøb af maskiner og maskinanlæg, så det sikres at ansvaret og opgaverne er placeret korrekt. Maskinsikkerhed ApS fortæller om både faldgruber og de gode løsninger, så dit næste projekt bliver en succes.
Speaker:
Hans Morten Henriksen, Direktør
3D TECH
Nedenfor kan du se programmet for 3D Tech tirsdag på hi-messen.
//Below you can see the programme for 3D Tech tuesday at the hi expo.
Moderator:
Steffen Haslund Schmidt, Head of Technology, Dansk AM Hub
3D print i metal på Grundfos
tuesDAy 5 OcT.| 10:00 - 10:30 AM | hal K
Sander vil fortælle om hvordan Grundfos ser fremtiden for metal 3D print i produkter og produktionsudstyr
Speaker:
Sander Skovhus Michelsen, Lead Engineer Additive Manufacturing, Grundfos
Konferenceindlægget kræver ingen forhåndstilmelding - kun en billet til hi-messen. // No registration is needed for the presentation - only a ticket to the exhibition.
Hør hvordan 3D print i metal er en vigtig brik i fremtiden for fødevarer produktions udstyr
tuesDAy 5 OcT.| 11:30 - 12:00 AM | hal K
Hør hvordan Marel sammen med Teknologisk institut kom i gang med at tænke metal 3D print. Hør også hvorfor Marel mener det giver værdi for dem, hvad de har lært og hvordan de kommer videre.
Speakers:
Mads Østergaard, Team Manager AM Production and Development, Teknologisk Institut
Thor Bramsen, Additive Manufacturing Programme Manager, Marel
Konferenceindlægget kræver ingen forhåndstilmelding - kun en billet til hi-messen. // No registration is needed for the presentation - only a ticket to the exhibition.
Metal 3D print med økonomi, lead time og bæredygtighed i fokus.
tuesDAy 5 OcT.| 13:00 - 13:30 AM | hal K
Force og Terma stiller op sammen med et indlæg som tager afsæt i virkeligheden – med en tænkt casebaseret tilgang med særligt fokus på økonomi, lead time og bæredygtighed. De søger ikke mod det akademiske, men mere i retning af den lokale spåntagende virksomhed, som kan få en gevinst.
Speaker:
Peter Tommy Nielsen, Head of Department , 3D Print & AM Technology, Force
Philippe Lovejoy-Courrier, Senior Specialist, Innovation & Affordability, Technology & Innovation, Terma Aerostructures
Konferenceindlægget kræver ingen forhåndstilmelding - kun en billet til hi-messen. // No registration is needed for the presentation - only a ticket to the exhibition.
Paneldiskusion om 3Dprint i metal
tuesDAy 5 OcT.| 14:00 - 14:30 AM | hal K
3D print i metal rummer uanede muligheder, og er meget mere end bare en direkte 1:1 erstatning for traditionel bearbejdning. I denne paneldiskussion vil vi tale om de typiske udfordringer man møder som SMV når en ny teknologi skal implementeres og hvad fremtiden bringer indenfor metal 3D print.
Steffen Haslund Schmidt, Head of Technology, Dansk AM Hub
Mads Østergaard, Team Manager AM Production and Development, Teknologisk Institut
Sander Skovhus Michelsen, Lead Engineer Additive Manufacturing, Grundfos
Peter Tommy Nielsen, Head of Department , 3D Print & AM Technology, Force
Konferenceindlægget kræver ingen forhåndstilmelding - kun en billet til hi-messen. // No registration is needed for the presentation - only a ticket to the exhibition.
The Smart Company
Nedenfor kan du se programmet for The Smart Company tirsdag på hi-messen.
//Below you can see the programme for The Smart Company tuesday at the hi expo.
The Smart Company Live Theatre
tuesDAy 5 OcT.| 10:00 - 10:50 AM | hal M
The Smart Company Live Theater arrangeres i samarbejde med AIDC Denmark og AIM Denmark, og inviterer gæsterne inden for i virksomheden, der benytter sig af smarte teknologier.
Gennem konkrete eksempler og demo’er, illustreres, hvordan de digitale løsninger med automatisk identifikation og datafangst fungerer sammen i praksis - og ikke mindst hvad de opsamlede data kan give af fordele for virksomheden.
Teaterpartnere:
Lyngsøe System
Intelligent System
Zebra Technologies
AIM Denmark / AIDC Denmark
Kræver ingen forhåndstilmelding - kun en billet til hi-messen. // No registration is needed for the presentation - only a ticket to the exhibition.
Klima positiv omstilling
tuesDAy 5 OcT.| 11:00 - 11:45 AM | hal M
Virksomheder bliver i stigende grad holdt ansvarlige for deres klimabelastning, samtidig med at der er tendens til at disse også kan bruge bæredygtighed som et konkurrenceparameter. CO2-udledning kan begrænses og i visse tilfælde helt elimineres. Her spiller IT og teknologi en vigtig rolle ikke mindst når det gælder klima-positiv innovation og udvikling af bæredygtige løsninger og ydelser. Dagens tre sessioner kommer til at omhandle hvordan virksomheder kan bruge teknologien til at lave innovative bæredygtige tiltag både målbare, eksekverbar og gennemslagskraftig.
Speaker:
Christian Engkrog Andersen, Chef, The Footprint Firm
Konferenceindlægget kræver ingen forhåndstilmelding - kun en billet til hi-messen. // No registration is needed for the presentation - only a ticket to the exhibition.
The Smart Company Live Theatre
tuesDAy 5 OcT.| 12:00 - 12:50 AM | hal M
The Smart Company Live Theater arrangeres i samarbejde med AIDC Denmark og AIM Denmark, og inviterer gæsterne inden for i virksomheden, der benytter sig af smarte teknologier.
Gennem konkrete eksempler og demo’er, illustreres, hvordan de digitale løsninger med automatisk identifikation og datafangst fungerer sammen i praksis - og ikke mindst hvad de opsamlede data kan give af fordele for virksomheden.
Teaterpartnere:
Lyngsøe System
Intelligent System
Zebra Technologies
AIM Denmark / AIDC Denmark
Kræver ingen forhåndstilmelding - kun en billet til hi-messen. // No registration is needed for the presentation - only a ticket to the exhibition.
Accelerates sustainable business growth both smarter and greener
tuesDAy 5 OcT.| 13:00 - 13:45 pM | hal M
Clever, en af Europas førende mobilitetstjenesteudbydere (MSP'er), udvider i dag ladeinfrastrukturen til morgendagens bæredygtige mobilitet. I denne præsentation vil Delegate fortælle, hvordan de har hjulpet med at Clever bruge intelligent teknologi til at udvide energiforbruget på en smartere og grønnere måde, hvilket både sikrer virksomhedens vækst og samtidig driver bæredygtig mobilitet fremad med deres kunder i tankerne.
Speaker:
Malthe Kirkhoff Stougaard, Solution Provider, Delegate
Konferenceindlægget kræver ingen forhåndstilmelding - kun en billet til hi-messen. // No registration is needed for the presentation - only a ticket to the exhibition.
Get ticket here
The Smart Company Live Theatre
tuesDAy 5 OcT.| 14:00 - 14:50 AM | hal M
The Smart Company Live Theater arrangeres i samarbejde med AIDC Denmark og AIM Denmark, og inviterer gæsterne inden for i virksomheden, der benytter sig af smarte teknologier.
Gennem konkrete eksempler og demo’er, illustreres, hvordan de digitale løsninger med automatisk identifikation og datafangst fungerer sammen i praksis - og ikke mindst hvad de opsamlede data kan give af fordele for virksomheden.
Teaterpartnere:
Lyngsøe System
Intelligent System
Zebra Technologies
AIM Denmark / AIDC Denmark
Kræver ingen forhåndstilmelding - kun en billet til hi-messen. // No registration is needed for the presentation - only a ticket to the exhibition.
How we make the sustainability efforts both Measurable, actionable and impactful
tuesDAy 5 OcT.| 15:00 - 15:45 pM | hal M
Paneldiskussion om: Hvordan vi gør bæredygtighedsindsatsen både målbar, praktisk og effektfuld, og hvordan kommer vi i gang.
Speaker:
Christian Engkrog Andersen, Chef & Business Development Manager, The Footprint Firm
Asger Haugaard, TBD from Delegate and TBD from Microsoft
Konferenceindlægget kræver ingen forhåndstilmelding - kun en billet til hi-messen. // No registration is needed for the presentation - only a ticket to the exhibition.
Get ticket here
